This is a partial list of  Engine and Related Parts.

Please call for prices.

203.778.2337

If the part # is highlighted, click for more information.

Part

Description

Part #

POINTS 009 Dist Bosch 4-001A
POINTS 009 Dist {BRAZILIAN BOSCH} 4-001B
CONDENSER 009 DIST {BOSCH} 4-002
ROTOR 009 DIST {BOSCH} 4-003
DISTRIBUTOR CAP 009 {BOSCH} BLACK 4-004
DISTRIBUTOR CAP 03010 BOSCH 009 - TAN 4-004A
SPARK PLUG W5BC BOSCH Copper Core 4-005
COIL BOSCH 12V BLUE 4-006
COIL Bracket - 4-006A
SPARK PLUG WIRE SET BOSCH HD STRT. 15'' C/W. 4-007A
SPARK PLUG WIRE SET HD BOSCH 90 DEG CL BT 7MM SLCN 12'' C/W. 4-007B
DISTRIBUTOR 009 BOSCH 4-010
DISTRIBUTOR CLAMP - 4-010A
STARTER BUSHING 6/6-volt to 6volt case 4-011
STARTER BUSHING 12/12-volt replacement starter bushing 4-012
STARTER BUSHING 12/6 -12-volt to 6-volt case 4-013
STARTER BUSHING 6/12 conversion bushing 4-014
STARTER Rebuilt Bosch SR11X 6-volt 4-015
EXTENDED OIL FILLER Fits std fill/gen stand extra tall w/rubber push on cap. 4-018
Oil Filler Extension Mach-Almn with threaded plastic cap. Fits std filler tower and 4-020 base w/lrg. 4-019
Crankcase Vent & Oil Filler w/scw cap Low Height w/large vent tube mach-almn cast to replace gen. 4-020

Part

Description

Part #

Threaded Oil Cap` Fits std oil towr base and rplcmnt for 4-020 oil cap 4-020A
GENERATOR STAND (USED) 4-021*
OIL VENT DEFLECTOR PLATE - 4-021A
Oil Block Off Plate custom almn-cast w/hrdwr & gskt. 4-022
OIL COOLER SEAL/O-ring (2 or 4 req) 4-023A
OIL COOLER NEW 4-024
OIL COOLER rebuilt 113-117-021rb type III 4-024rb
COOLER/ FILTER MOUNTING BLOCK Mach/ Almnm can be fitted for full flow. 4-025
Remote Filter Adapter - 4-027
PUSHROD TUBE - 4-028
PUSHROD TUBE SEAL - 4-028A
Self Tapping Case Stud 9 - 4-030-8
Self Tapping Case Stud 9 - 4-030-9
VALVE COVER STOCK VW 4-035
VALVE COVER BAIL 4-035A
VALVE COVER GASKET - 4-035B
VALVE COVER GASKETS (10 pack saver) 4-035C
TEMPERED VALVE ADJUSTER SCREW - 4-040
VALVE ADJUSTER SCREW NUT - 4-040A
VALVE KEEPERS - 4-041
AUTOWERKS HD VALVE SPRING RETAINERS - 4-042

Part

Description

Part #

OIL PUMP - 4-049
OIL PUMP COVER - 4-049A
Pump/Cover Gasket - 4-049B
OIL SUMP GSKT SET - 4-050
OIL DRAIN PLUG - 4-051
OIL DRAIN PLUG GSKT - 4-051A
OIL SUMP PLATE/KIT - 4-052
CAP OIL FILLER - 4-053
GSKT OIL FILLER CAP - 4-053A
ENGINE GASKET SET W/Rear MAIN SEAL 4-065
REAR MAIN SEAL SILICONE 4-066
CRANK PULLEY NEW GERMAN 4-070
Aluminum PowerPully

(6 O.D.)

w/accurate deg-ring for precise engine timing. 4-070A
WOODRUFF KEY PULLY 4-070B
CRANK PULLEY BOLT - 4-071
PULLEY BOLT WASHER - 4-071A
GLAND NUT - 4-072
WASHER GLAND NUT - 4-072A
FUEL PUMP With Gasket 4-080A

Part

Description

Part #

FUEL PUMP FLANGE - 4-081
FUEL PUMP PUSHROD - 4-081A
FUEL PMP GSKT TOP - 4-082
FUEL PMP GSKT BTM - 4-082A
FUEL FILTER PLASTIC CLEAR 4-083
5MM FUEL LINE CLOTH/BRADED 4-084
Clear-View Fuel Filter Universal 1/8 NPT. each end. 4-085
FV CARB RBLD KIT - 4-090
CARB SWIVEL PIN For Accelerator cable 4-091
THROTTLE RETURN SPRING 11-1/2'' LNG LOOP AT ONE END. 4-095
INTAKE MANIFOLD GASKET. - 4-101
AUTOWERKS -almn INTAKE GASKETS - 4-102
EXHAUST GASKETS - 4-105
CLUTCH DISC - 4-110
PRESSURE PLATE - 4-111
F&S PRESSURE PLATE - 4-111A
High Rev Windage Tray - 4-120
8mm Chromoly Head Stud Kit - 4-130

 Prices do not include shipping and handling.
VSR is not responsible for any misprints or errors in the above parts price list.
Part prices are subject to change without notice.


 

VSR
 13 Taylor St
  Danbury, CT 06810
  Phone: 203.778.2337
  FAX:203.792.9114 
 E-Mail:
steve@veesportracing.com


All orders shipped next day
(sometimes sooner!)